Things You Should Know About Floor Graphics

Your vehicle wraps and vinyl banner installation skills with other substrates will come in handy with floor graphics. However, there’s a new thing you need to learn in order to increase your business with floor graphics.

If the edges of the graphics begin to peel up before the recommended lifespan of the products, then you will have to do the graphic again. Why would the sides elevate up? One reason is because the floor wasn’t properly ready before you applied the graphic.

The summary of the story is you can spend a sometime for preparing now, or you can spend a lot more time redoing the job later. That’s really no choice at all. So you should know how to place the floor graphic? How to prepare the surface for graphic? How to install the floor graphic?

Where to Place the Floor Graphic

Before installation of floor graphic, you would like to take care the vinyl can stick with the flooring material. Generally, floor graphics will be applied to waxed vinyl, sealed concrete, marble, ceramic tile, sealed wood and Terrazo, according to Signups and Banners.

But it is not the only condition. The floor surface must be secure and in good condition. Houston sign company suggests avoiding the temptation to install floor graphics over uneven tile. The floor on which the graphic is applied should be well secured, and free from cracks and chips. The floor surface should be free of silicone, as the presence of silicone will inhibit anchorage of the graphic to the floor surface.

You will also want to be sure the floor finishing is well bonded to the floor. That is because floor finishes that aren’t well bonded may separate or release and result in the graphic lifting prematurely. What’s more, Signups and Banners suggests, the floor finish may come off with the graphic when the graphic is removed and demand the reapplication of the floor finish.

Preparation of the surface

Once you’ve decided the location for the floor graphic, you will need to go through similar steps as you would to install graphic. In other words, you need to prepare the surface for the graphic.

1.    First, spray the floor area where the graphic will be applied.

2.    Next, clean an area that is 6 to 8 inches larger than the graphic. This gives you a margin for error.

3.    Now, wipe the floor clean and then dry it with a lint-free paper towel. Of course, Signups and Banners recommends its Perfect-it Wipe.

4.    You will need to wipe the floor with a clean towel moistened with alcohol that contains no lotions. Again, to avoid residue, wipe the floor completely dry with a lint-free paper towel before the alcohol evaporates.

5.    If you are working on a painted floor, you have to do a paint test to make sure that if you have to reposition the graphic, you are not also going to remove the paint with it.

If you don’t prepare the floor, then you compromise the durability of the floor graphic. Signups and Banners offers for floor graphics.